Skip to main content

Vogtle First to Implement New Voluntary Rule Allowing Improved Safety Focus

The following guest post comes from Victoria Anderson, senior project manager for risk assessment at NEI.

Since the NRC published the Probabilistic Risk Assessment Policy Statement in 1995, both the industry and NRC have worked to use risk information to better focus implementation of regulations at our country’s nuclear reactors. Risk information has helped advance maintenance efforts, routine inspections and testing procedures to ensure that licensees direct resources to the equipment and practices that are most important to safe, reliable operation of their plants.

In one such effort, in 2004, the NRC published a voluntary rule – 10 CFR 50.69, Risk-informed categorization and treatment of structures, systems and components for nuclear power reactors – that would allow licensees to refocus their equipment special treatment requirements on the structures, systems and components that are the most important to protecting the plant. Specifically, licensees implementing this voluntary rule are able to improve safety focus on important equipment identified in evaluations, while gaining operational flexibility by moving some equipment with very low safety impact to commercial treatment, rather than enhanced treatment.

Vogtle Electric Generating Plant
Last Wednesday marked a major advancement in risk informed regulation, as Plant Vogtle in Burke County, GA received an NRC safety evaluation report allowing them to implement 10 CFR 50.69 at its site. As the pilot plant for this effort, Southern will be the first utility to use the provisions of this rule to ensure that key plant programs are structured to focus plant attention on equipment most important to safe operations.

In particular, Vogtle will be able to take a graded approach to treatment of its equipment in various programs, including equipment qualification, testing and procurement, such that requirements for these programs are commensurate with the safety significance of the equipment. The personnel involved in these aspects of plant operations have been working through program development and training for over two years, and are well-positioned to support an efficient roll-out of the 10 CFR 50.69 program at Vogtle.

Thanks to Southern’s hard work on the pilot effort, facilitated by support from the NRC, the nuclear energy industry expects that several additional plants will follow Southern’s lead and use the insights and lessons learned from the pilot to pursue implementation of 10 CFR 50.69. This is just one of the many ways that utilities continually integrate the latest information and practices to operate our fleet more and more efficiently while maintaining safe operations.

Comments

Popular posts from this blog

Activists' Claims Distort Facts about Advanced Reactor Design

Below is from our rapid response team . Yesterday, regional anti-nuclear organizations asked federal nuclear energy regulators to launch an investigation into what it claims are “newly identified flaws” in Westinghouse’s advanced reactor design, the AP1000. During a teleconference releasing a report on the subject, participants urged the Nuclear Regulatory Commission to suspend license reviews of proposed AP1000 reactors. In its news release, even the groups making these allegations provide conflicting information on its findings. In one instance, the groups cite “dozens of corrosion holes” at reactor vessels and in another says that eight holes have been documented. In all cases, there is another containment mechanism that would provide a barrier to radiation release. Below, we examine why these claims are unwarranted and why the AP1000 design certification process should continue as designated by the NRC. Myth: In the AP1000 reactor design, the gap between the shield bu...

What Happens During a Refueling Outage?

You may have noticed over the past few weeks that a number of nuclear plants are shut down for refueling outages or are resuming operations after just returning from one. This type of routine outage usually occurs in the spring or fall when electricity demand is low so that nuclear reactors can replace about one-third of the spent fuel rods with new fuel and conduct other routine maintenance and repairs at the plant. To get a better sense of how refueling works at a nuclear energy facility, I spoke with Marcus Nichol, NEI’s senior project manager for used fuel storage and transportation, and asked him to explain the basics. Why does a nuclear plant need to replace one-third of its fuel? Nichol: The main purpose of a refueling outage is to replace older fuel that is depleted—meaning it can no longer efficiently produce energy from nuclear fission reactions—with new fuel. This “used fuel” has typically been used in the reactor for four-and-a-half to six years before it is pe...

Nuclear Utility Moves Up in Credit Ratings, Bank is "Comfortable with Nuclear Strategy"

Some positive signs that nuclear utilities can continue to receive positive ratings even while they finance new nuclear plants for the first time in decades: Wells Fargo upgrades SCANA to Outperform from Market Perform Wells analyst says, "YTD, SCG shares have underperformed the Regulated Electrics (total return +2% vs. +9%). Shares trade at 11.3X our 10E EPS, a modest discount to the peer group median of 11.8X. We view the valuation as attractive given a comparatively constructive regulatory environment and potential for above-average long-term EPS growth prospects ... Comfortable with Nuclear Strategy. SCG plans to participate in the development of two regulated nuclear units at a cost of $6.3B, raising legitimate concerns regarding financing and construction. We have carefully considered the risks and are comfortable with SCG’s strategy based on a highly constructive political & regulatory environment, manageable financing needs stretched out over 10 years, strong partners...