China Takes Greenhouse Gas Emissions Lead

From The Age (Australia):

CHINA has surged past the United States to become the world's biggest emitter of greenhouse gases, beating even the most pessimistic predictions that it would take at least another year to outstrip the US.

The findings, by a Dutch environmental agency that advises the Netherlands Government, sharply raises the stakes as world leaders try to reach a climate accord — to include China and the US — to succeed the 1997 Kyoto protocol when it expires in 2012.

Australia, which is hosting the next APEC summit, has been lobbying the US and China to strike a regional deal on climate change in Sydney in September. But in its first action plan on climate change, released this month, China committed itself to improving energy efficiency but rejected mandatory emission cuts, as the US is demanding, dealing such hopes a blow.

Comments

John Fitzpatrick said…

The United States, on a per person basis, emits four times as much carbon as China. See the numbers here

June 20, 2007 at 5:43 PM

Anonymous said…

So, by that measure, all we have to do is start popping out more kids so our per capita carbon output drops below that of China? Probably total carbon emissions is more important on a global basis than per capita measures.

June 21, 2007 at 7:39 AM

Anonymous said…

The US per capita emissions may be 4 times China but the US per capita GPA is 6 times China. China's rapidly growing economy combined with the a relatively high carbon emission rate per unit of economic activity should raise a concern among those who worry about CO2. Also, the "carbon efficiency" of the US and other developed countries is increasing while China's does not seem to be.

June 21, 2007 at 8:53 AM

Activists' Claims Distort Facts about Advanced Reactor Design

Below is from our rapid response team . Yesterday, regional anti-nuclear organizations asked federal nuclear energy regulators to launch an investigation into what it claims are “newly identified flaws” in Westinghouse’s advanced reactor design, the AP1000. During a teleconference releasing a report on the subject, participants urged the Nuclear Regulatory Commission to suspend license reviews of proposed AP1000 reactors. In its news release, even the groups making these allegations provide conflicting information on its findings. In one instance, the groups cite “dozens of corrosion holes” at reactor vessels and in another says that eight holes have been documented. In all cases, there is another containment mechanism that would provide a barrier to radiation release. Below, we examine why these claims are unwarranted and why the AP1000 design certification process should continue as designated by the NRC. Myth: In the AP1000 reactor design, the gap between the shield bu...

How many nuclear plants does it take to meet the world's energy needs?

Several weeks ago Joshua Pearce at Clarion University in Pennsylvania released a study titled “ Thermodynamic limitations to nuclear energy deployment as a greenhouse gas mitigation technology .” In the study he stated... nuclear energy production would have to increase by 10.5% per year from 2010 to 2050 to both replace fossil-fuel-energy use and meet the future energy demands. This line, of course, made the headlines and has been picked up by several outlets and blogs . When looking into his calculations for this statement, he made one assumption error that overstated the above sentence by nearly a factor of three. Page 121, Section 4.1 of the study states: Richard Smalley pointed out that in 2004, the global economy consumed the equivalent of 220 million barrels of oil per day, which converted into electricity terms is the equivalent of 14.5 TeraWatts (TW), or 14,500,000 MegaWatts (MW) (2005). … With a nuclear plant having about 1000 MW (1 GW) of capacity, we would need 14,500...

What Happens During a Refueling Outage?

You may have noticed over the past few weeks that a number of nuclear plants are shut down for refueling outages or are resuming operations after just returning from one. This type of routine outage usually occurs in the spring or fall when electricity demand is low so that nuclear reactors can replace about one-third of the spent fuel rods with new fuel and conduct other routine maintenance and repairs at the plant. To get a better sense of how refueling works at a nuclear energy facility, I spoke with Marcus Nichol, NEI’s senior project manager for used fuel storage and transportation, and asked him to explain the basics. Why does a nuclear plant need to replace one-third of its fuel? Nichol: The main purpose of a refueling outage is to replace older fuel that is depleted—meaning it can no longer efficiently produce energy from nuclear fission reactions—with new fuel. This “used fuel” has typically been used in the reactor for four-and-a-half to six years before it is pe...

NEI Nuclear Notes

Search This Blog