Skip to main content

GE Submits ESBWR to NRC for Design Approval

By Eric McErlain
From yesterday's wire:
GE Energy's nuclear business has reached a major milestone in the development of its new reactor design - the economic simplified boiling water reactor (ESBWR) - by formally submitting its Design Certification application to the U.S. Nuclear Regulatory Commission.

GE delivered its 19-chapter, 7,500-page application package to the NRC in Washington on August 24. The submission, which represents the culmination of 150,000 man-hours of design work over a 10-year period, should lead to the Final Design Approval of the ESBWR by late 2006, followed immediately by Design Certification.

The 1,500-megawatt ESBWR is a Generation III+ reactor design because of its design simplicity and passive safety features. It depends on fewer "active" mechanical systems, with associated pumps and valves, and instead relies on more reliable "passive" systems that utilize natural forces, including natural circulation and gravity.

The ESBWR is the only reactor that fully relies on natural circulation for normal plant operations as well as passive safety systems, thus making it the most advanced, passive Generation III+ reactor to be presented to the NRC for final approval.

"Submitting the ESBWR for formal design approval represents a truly significant accomplishment by GE Energy's engineering team that worked on this project, especially given the magnitude of the document and complex technical challenges," said Andy White, president and CEO of GE's nuclear business. "Many of our customers are already aware that the ESBWR is an extremely elegant design that offers all the benefits they require: safety, reliability and operational flexibility delivered with the most cost-effective advanced reactor design we can provide - one that is based on GE's proven BWR technology."
Back in May, GE inked an agreement with NuStart Energy to seek the license in connection with the consortium's efforts to site and build a new nuclear reactor. For more on the ESBWR, click here (PDF) for a fact sheet from GE. And click here for the Design Certification Application Review information from the NRC.

Technorati tags:

Comments

Post a Comment

Popular posts from this blog

Activists' Claims Distort Facts about Advanced Reactor Design

By
Below is from our rapid response team . Yesterday, regional anti-nuclear organizations asked federal nuclear energy regulators to launch an investigation into what it claims are “newly identified flaws” in Westinghouse’s advanced reactor design, the AP1000. During a teleconference releasing a report on the subject, participants urged the Nuclear Regulatory Commission to suspend license reviews of proposed AP1000 reactors. In its news release, even the groups making these allegations provide conflicting information on its findings. In one instance, the groups cite “dozens of corrosion holes” at reactor vessels and in another says that eight holes have been documented. In all cases, there is another containment mechanism that would provide a barrier to radiation release. Below, we examine why these claims are unwarranted and why the AP1000 design certification process should continue as designated by the NRC. Myth: In the AP1000 reactor design, the gap between the shield bu...
23 comments
Read more

What Happens During a Refueling Outage?

By
You may have noticed over the past few weeks that a number of nuclear plants are shut down for refueling outages or are resuming operations after just returning from one. This type of routine outage usually occurs in the spring or fall when electricity demand is low so that nuclear reactors can replace about one-third of the spent fuel rods with new fuel and conduct other routine maintenance and repairs at the plant. To get a better sense of how refueling works at a nuclear energy facility, I spoke with Marcus Nichol, NEI’s senior project manager for used fuel storage and transportation, and asked him to explain the basics. Why does a nuclear plant need to replace one-third of its fuel? Nichol: The main purpose of a refueling outage is to replace older fuel that is depleted—meaning it can no longer efficiently produce energy from nuclear fission reactions—with new fuel. This “used fuel” has typically been used in the reactor for four-and-a-half to six years before it is pe...
6 comments
Read more

Nuclear Utility Moves Up in Credit Ratings, Bank is "Comfortable with Nuclear Strategy"

By
Some positive signs that nuclear utilities can continue to receive positive ratings even while they finance new nuclear plants for the first time in decades: Wells Fargo upgrades SCANA to Outperform from Market Perform Wells analyst says, "YTD, SCG shares have underperformed the Regulated Electrics (total return +2% vs. +9%). Shares trade at 11.3X our 10E EPS, a modest discount to the peer group median of 11.8X. We view the valuation as attractive given a comparatively constructive regulatory environment and potential for above-average long-term EPS growth prospects ... Comfortable with Nuclear Strategy. SCG plans to participate in the development of two regulated nuclear units at a cost of $6.3B, raising legitimate concerns regarding financing and construction. We have carefully considered the risks and are comfortable with SCG’s strategy based on a highly constructive political & regulatory environment, manageable financing needs stretched out over 10 years, strong partners...
Post a Comment
Read more