Skip to main content

The Beginnings of the Energy Bill: Here We Go!

By

Rep. Henry Waxman From the NYT:

Two senior House Democrats will unveil a 600-page draft global warming and energy bill today that they hope will prompt an intense round of internal negotiations, culminating with passage out of the Energy and Commerce Committee before June, according to several lawmakers and off-the-Hill sources briefed on the measure.

The bill from Chairman Henry Waxman (D-Calif.) and Energy and Environment Subcommittee Chairman Ed Markey (D-Mass.) includes four separate titles aimed at overhauling U.S. climate and energy policy, starting with a cap-and-trade program that sets mandatory limits on greenhouse gas emissions over the next four decades.

Waxman and Markey – tough customers on nuclear, but there’s wind at the back of the solar radiance that is, uh, nuclear. So we’ll see.

Here are some dates to put on your calendar:

Waxman and Markey also unveiled a preliminary schedule for moving the legislation, starting with hearings on the bill during the week of April 20 as lawmakers return from a two-week spring recess. A subcommittee markup is penciled in for the week of April 27, with a full committee markup to follow during the week of May 11.

The story only quotes Democrats who feel this will sail smoothly through Congress problem-free. And Pangloss felt we live in the best of all possible worlds.

Early days: if you look at the posts below about Reps. Bachmann and Shimkus and then read this:

Both the Waxman-Markey draft and Obama's plan [on cap-and-trade] do line up on a midcentury target curbing emissions by 83 percent. But the House lawmakers offer more specifics than the new administration when it comes to the cap-and-trade program's start in 2012. The Democrats call for a 3 percent emissions cut from 2005 levels. They also include a 42 percent reduction in 2030.

You would be right in thinking that, at the least, there will be some heated discussions.

Lots more to come about this in the weeks ahead. Stay tuned.

Rep. Henry Waxman.

Labels:

Comments

J. Speaker said…
Let's heat up the Democrat's discussion with the carbon dioxide reduction solution outlined at the "Coal2Nuclear" site (http://coal2nuclear.com).
March 31, 2009 at 1:43 PM
Post a Comment

Popular posts from this blog

Activists' Claims Distort Facts about Advanced Reactor Design

By
Below is from our rapid response team . Yesterday, regional anti-nuclear organizations asked federal nuclear energy regulators to launch an investigation into what it claims are “newly identified flaws” in Westinghouse’s advanced reactor design, the AP1000. During a teleconference releasing a report on the subject, participants urged the Nuclear Regulatory Commission to suspend license reviews of proposed AP1000 reactors. In its news release, even the groups making these allegations provide conflicting information on its findings. In one instance, the groups cite “dozens of corrosion holes” at reactor vessels and in another says that eight holes have been documented. In all cases, there is another containment mechanism that would provide a barrier to radiation release. Below, we examine why these claims are unwarranted and why the AP1000 design certification process should continue as designated by the NRC. Myth: In the AP1000 reactor design, the gap between the shield bu...
23 comments
Read more

How many nuclear plants does it take to meet the world's energy needs?

By
Several weeks ago Joshua Pearce at Clarion University in Pennsylvania released a study titled “ Thermodynamic limitations to nuclear energy deployment as a greenhouse gas mitigation technology .” In the study he stated... nuclear energy production would have to increase by 10.5% per year from 2010 to 2050 to both replace fossil-fuel-energy use and meet the future energy demands. This line, of course, made the headlines and has been picked up by several outlets and blogs . When looking into his calculations for this statement, he made one assumption error that overstated the above sentence by nearly a factor of three. Page 121, Section 4.1 of the study states: Richard Smalley pointed out that in 2004, the global economy consumed the equivalent of 220 million barrels of oil per day, which converted into electricity terms is the equivalent of 14.5 TeraWatts (TW), or 14,500,000 MegaWatts (MW) (2005). … With a nuclear plant having about 1000 MW (1 GW) of capacity, we would need 14,500...
7 comments
Read more

What Happens During a Refueling Outage?

By
You may have noticed over the past few weeks that a number of nuclear plants are shut down for refueling outages or are resuming operations after just returning from one. This type of routine outage usually occurs in the spring or fall when electricity demand is low so that nuclear reactors can replace about one-third of the spent fuel rods with new fuel and conduct other routine maintenance and repairs at the plant. To get a better sense of how refueling works at a nuclear energy facility, I spoke with Marcus Nichol, NEI’s senior project manager for used fuel storage and transportation, and asked him to explain the basics. Why does a nuclear plant need to replace one-third of its fuel? Nichol: The main purpose of a refueling outage is to replace older fuel that is depleted—meaning it can no longer efficiently produce energy from nuclear fission reactions—with new fuel. This “used fuel” has typically been used in the reactor for four-and-a-half to six years before it is pe...
6 comments
Read more