Skip to main content

Nuclear Energy, Increased Temperatures and the Truth About the Steam Cycle

Summer is just around the corner, which means that an old anti-nuke talking point that was first used about a year ago is getting trotted out in the press again.

From the International Herald Tribune:
But there is a less well-known side of nuclear power: It requires great amounts of cool water to keep reactors operating at safe temperatures. That is worrying if the rivers and reservoirs which many power plants rely on for water are hot or depleted because of steadily rising air temperatures.

If temperatures soar above average this summer - let alone steadily increase in years to come, as many scientists predict - many nuclear plants could face a dilemma: Either cut output or break environmental rules, in either case hurting their reputation with customers and the public.
For details on why this is not an insurmountable problem, click here and here for posts from our archives. Here's an excerpt from one of those posts by my friend Lisa Stiles:
It doesn't matter if you're burning uranium, coal, oil, or cow dung, anything that uses a steam cycle has the potential problem of exceeding discharge limits if temperatures are excessively warm. Since only about 1/3 of the heat is usable to turn a turbine, the waste heat has to go somewhere. To not have this problem you can:

--Not make the environmental regulations overly conservative
--Build a bigger heat sink
--Build a smaller plant
--Invent a thermodynamic cycle better than the ones the world's best minds have come up with in the past two centuries or so (and be sure to include my name on the patent).
Be sure to read the rest right now.

Comments

Rod Adams said…
I agree with Lisa's explanation all the way up to the point where she says "Invent a thermodynamic cycle better than the ones the world's best minds have come up with in the past two centuries or so (and be sure to include my name on the patent)."

Smaller, more distributed plants can help by effectively providing a larger heat sink per unit waste heat produced. Larger heat sinks work, and certainly changing the rules to allow hotter discharges work (it is certainly worth investigating, but there is a real risk to plant and animal life that must be understood.)

With regard to "better" thermodynamic cycles, there are others available that do not have as much of a problem in exceeding discharge limits. Combined cycle gas turbines and cogeneration plants that make better use of their plant's input heat have been around for many years. Since they obtain thermal efficiencies approaching 60% instead of the 33% common to the simple Rankine cycle used by conventional light water reactors, they have less waste to get rid of.

There is a distinct possibility that nuclear combined cycle or cogeneration plants will be available in the not too distant future - the PBMR out of South Africa may be a suitable base plant for such a development.
Anonymous said…
The issue with the French plants is that they use direct cooling with river water. The simple solution to this problem is to use a cooling tower, then there is no limitation from temperature increases to local bodies of water (rivers or lakes). This is the solution that is being implemented for the new ESBWR at North Anna, where there were concerns about too much additional heating of Lake Anna (which is an artificial lake built to cool the original reactors). Heat rejection is no problem if one uses cooling towers.
kconrad said…
Please tell me that the heat emitted from nuclear plants, through the cooling process does not add to the heating of our planet. There must be some way you all can rationalize that away, too.

Popular posts from this blog

Activists' Claims Distort Facts about Advanced Reactor Design

Below is from our rapid response team . Yesterday, regional anti-nuclear organizations asked federal nuclear energy regulators to launch an investigation into what it claims are “newly identified flaws” in Westinghouse’s advanced reactor design, the AP1000. During a teleconference releasing a report on the subject, participants urged the Nuclear Regulatory Commission to suspend license reviews of proposed AP1000 reactors. In its news release, even the groups making these allegations provide conflicting information on its findings. In one instance, the groups cite “dozens of corrosion holes” at reactor vessels and in another says that eight holes have been documented. In all cases, there is another containment mechanism that would provide a barrier to radiation release. Below, we examine why these claims are unwarranted and why the AP1000 design certification process should continue as designated by the NRC. Myth: In the AP1000 reactor design, the gap between the shield bu...

How many nuclear plants does it take to meet the world's energy needs?

Several weeks ago Joshua Pearce at Clarion University in Pennsylvania released a study titled “ Thermodynamic limitations to nuclear energy deployment as a greenhouse gas mitigation technology .” In the study he stated... nuclear energy production would have to increase by 10.5% per year from 2010 to 2050 to both replace fossil-fuel-energy use and meet the future energy demands. This line, of course, made the headlines and has been picked up by several outlets and blogs . When looking into his calculations for this statement, he made one assumption error that overstated the above sentence by nearly a factor of three. Page 121, Section 4.1 of the study states: Richard Smalley pointed out that in 2004, the global economy consumed the equivalent of 220 million barrels of oil per day, which converted into electricity terms is the equivalent of 14.5 TeraWatts (TW), or 14,500,000 MegaWatts (MW) (2005). … With a nuclear plant having about 1000 MW (1 GW) of capacity, we would need 14,500...

What Happens During a Refueling Outage?

You may have noticed over the past few weeks that a number of nuclear plants are shut down for refueling outages or are resuming operations after just returning from one. This type of routine outage usually occurs in the spring or fall when electricity demand is low so that nuclear reactors can replace about one-third of the spent fuel rods with new fuel and conduct other routine maintenance and repairs at the plant. To get a better sense of how refueling works at a nuclear energy facility, I spoke with Marcus Nichol, NEI’s senior project manager for used fuel storage and transportation, and asked him to explain the basics. Why does a nuclear plant need to replace one-third of its fuel? Nichol: The main purpose of a refueling outage is to replace older fuel that is depleted—meaning it can no longer efficiently produce energy from nuclear fission reactions—with new fuel. This “used fuel” has typically been used in the reactor for four-and-a-half to six years before it is pe...