Skip to main content

Now is the Time to ‘Get Busy’ on Nuclear Resurgence, Sessions Says

“Time’s a wastin’ ” was the repeated message guest speaker Sen. Jeff Sessions (R-Ala.) imparted to attendees at the Nuclear Regulatory Commission’s Regulatory Information Conference last week.

In remarks aimed at Congress, federal agencies and the nuclear industry itself, Sessions—who serves on the Senate Energy and Natural Resources Committee—said the United States for too long has foregone pursuing nuclear energy as an important part of the answer to the growing need for a secure energy source to help meet the country’s growing energy needs while meeting clean air goals.

Sessions said he hopes we will one day look back at the restart of the Browns Ferry plant last year as the starting point of a nuclear resurgence. He noted that his state has five operating reactors with applications submitted for two more.

“It’s clear nuclear power ain’t dead yet, as we might say in Alabama,” Sessions said.

The lawmaker recounted the frustration he felt after touring the Bellefonte plant shortly after entering the Senate in 1997.

“That’s a $4 billion facility,” Sessions said. “It looks like you could walk into the control room and start it up. I couldn’t help but think how much CO2, mercury, nitrogen oxide and sulfur oxide has been emitted because that never started up. It’s a great tragedy; and one that is replicated too often around the country.”

Comments

Anonymous said…
Wow I'm agreeing with what a politician said!

Popular posts from this blog

Activists' Claims Distort Facts about Advanced Reactor Design

Below is from our rapid response team . Yesterday, regional anti-nuclear organizations asked federal nuclear energy regulators to launch an investigation into what it claims are “newly identified flaws” in Westinghouse’s advanced reactor design, the AP1000. During a teleconference releasing a report on the subject, participants urged the Nuclear Regulatory Commission to suspend license reviews of proposed AP1000 reactors. In its news release, even the groups making these allegations provide conflicting information on its findings. In one instance, the groups cite “dozens of corrosion holes” at reactor vessels and in another says that eight holes have been documented. In all cases, there is another containment mechanism that would provide a barrier to radiation release. Below, we examine why these claims are unwarranted and why the AP1000 design certification process should continue as designated by the NRC. Myth: In the AP1000 reactor design, the gap between the shield bu...

How many nuclear plants does it take to meet the world's energy needs?

Several weeks ago Joshua Pearce at Clarion University in Pennsylvania released a study titled “ Thermodynamic limitations to nuclear energy deployment as a greenhouse gas mitigation technology .” In the study he stated... nuclear energy production would have to increase by 10.5% per year from 2010 to 2050 to both replace fossil-fuel-energy use and meet the future energy demands. This line, of course, made the headlines and has been picked up by several outlets and blogs . When looking into his calculations for this statement, he made one assumption error that overstated the above sentence by nearly a factor of three. Page 121, Section 4.1 of the study states: Richard Smalley pointed out that in 2004, the global economy consumed the equivalent of 220 million barrels of oil per day, which converted into electricity terms is the equivalent of 14.5 TeraWatts (TW), or 14,500,000 MegaWatts (MW) (2005). … With a nuclear plant having about 1000 MW (1 GW) of capacity, we would need 14,500...

What Happens During a Refueling Outage?

You may have noticed over the past few weeks that a number of nuclear plants are shut down for refueling outages or are resuming operations after just returning from one. This type of routine outage usually occurs in the spring or fall when electricity demand is low so that nuclear reactors can replace about one-third of the spent fuel rods with new fuel and conduct other routine maintenance and repairs at the plant. To get a better sense of how refueling works at a nuclear energy facility, I spoke with Marcus Nichol, NEI’s senior project manager for used fuel storage and transportation, and asked him to explain the basics. Why does a nuclear plant need to replace one-third of its fuel? Nichol: The main purpose of a refueling outage is to replace older fuel that is depleted—meaning it can no longer efficiently produce energy from nuclear fission reactions—with new fuel. This “used fuel” has typically been used in the reactor for four-and-a-half to six years before it is pe...