President Bush: We must expand our nuclear power industry."

President Bush addressed a meeting of the National Association of Manufacturers here in Washington yesterday, and he continued to beat the drum for more nuclear energy:

Here's some ideas. One, we must -- we must expand our nuclear power industry if we want to be competitive in the 21st century. (Applause.) We have got to be wise -- we have got to push hard to build new plants. And the energy bill I signed last year is -- it's a good step forward. This government is going to spend a lot of money on fast breeder reactor technology. We're going to join with other countries to work on fast breeder reactor technology so that we can burn reprocessed fuel which will reduce the waste on civilian nuclear energy. In other words, there's technological gains to be made that will enable us to even advance nuclear power even faster.

And by the way, it's not only in our interest to develop nuclear power, it's in the interest of our country that India and China develop nuclear power. In the global energy market, when demand for hydrocarbons goes up in energy in China, it affects your gasoline prices. And therefore, the more we can help these countries develop technology, the more we can help them develop a civilian nuclear industry that is safe, the better off it is for American consumers.

Thanks to our friend at NAM, Pat Cleary for the heads up.

Technorati tags: Nuclear Energy, Nuclear Power, Electricity, Environment, Energy

Comments

Activists' Claims Distort Facts about Advanced Reactor Design

Below is from our rapid response team . Yesterday, regional anti-nuclear organizations asked federal nuclear energy regulators to launch an investigation into what it claims are “newly identified flaws” in Westinghouse’s advanced reactor design, the AP1000. During a teleconference releasing a report on the subject, participants urged the Nuclear Regulatory Commission to suspend license reviews of proposed AP1000 reactors. In its news release, even the groups making these allegations provide conflicting information on its findings. In one instance, the groups cite “dozens of corrosion holes” at reactor vessels and in another says that eight holes have been documented. In all cases, there is another containment mechanism that would provide a barrier to radiation release. Below, we examine why these claims are unwarranted and why the AP1000 design certification process should continue as designated by the NRC. Myth: In the AP1000 reactor design, the gap between the shield bu...

How many nuclear plants does it take to meet the world's energy needs?

Several weeks ago Joshua Pearce at Clarion University in Pennsylvania released a study titled “ Thermodynamic limitations to nuclear energy deployment as a greenhouse gas mitigation technology .” In the study he stated... nuclear energy production would have to increase by 10.5% per year from 2010 to 2050 to both replace fossil-fuel-energy use and meet the future energy demands. This line, of course, made the headlines and has been picked up by several outlets and blogs . When looking into his calculations for this statement, he made one assumption error that overstated the above sentence by nearly a factor of three. Page 121, Section 4.1 of the study states: Richard Smalley pointed out that in 2004, the global economy consumed the equivalent of 220 million barrels of oil per day, which converted into electricity terms is the equivalent of 14.5 TeraWatts (TW), or 14,500,000 MegaWatts (MW) (2005). … With a nuclear plant having about 1000 MW (1 GW) of capacity, we would need 14,500...

What Happens During a Refueling Outage?

You may have noticed over the past few weeks that a number of nuclear plants are shut down for refueling outages or are resuming operations after just returning from one. This type of routine outage usually occurs in the spring or fall when electricity demand is low so that nuclear reactors can replace about one-third of the spent fuel rods with new fuel and conduct other routine maintenance and repairs at the plant. To get a better sense of how refueling works at a nuclear energy facility, I spoke with Marcus Nichol, NEI’s senior project manager for used fuel storage and transportation, and asked him to explain the basics. Why does a nuclear plant need to replace one-third of its fuel? Nichol: The main purpose of a refueling outage is to replace older fuel that is depleted—meaning it can no longer efficiently produce energy from nuclear fission reactions—with new fuel. This “used fuel” has typically been used in the reactor for four-and-a-half to six years before it is pe...

NEI Nuclear Notes

Search This Blog