Russia to Build Floating Nuclear Plant

Russia's Federal Nuclear Energy Agency has announced its intentions to build the world's first floating nuclear power plant (FNPP) as early as 2006.

The plant will produce roughly 1/150th of the power produced by a standard Russian NPP (using a VVER-1000 water-cooled reactor). Construction could begin in 2006.

The mini-station will be located in the White Sea, off the coast of the town of Severodvinsk (in the Arkhangelsk region in northern Russia). It will be moored near the Sevmash plant, which is the main facility of the State Nuclear Shipbuilding Center. The FNPP will be equipped with two power units using KLT-40S reactors. The plant will meet all of Sevmash's energy requirements for just 5 or 6 cents per kilowatt. If necessary, the plant will also be able to supply heat and desalinate seawater.

"If conditions are favorable, the floating plant could be operational in four to five years' time," said Yevgeny Kuzin, general director of the public joint-stock company Malaya Energetika. By "conditions," Kuzin, who is the project leader, means funding. The nuclear "baby" will cost about $200,000. Kuzin says that it will be hard to secure the necessary money.

... Kuzin says these vessels have shown themselves to be highly reliable and that they do not have any kind of radioactive impact on the environment. "When the plant is decommissioned and pulled out, it leaves absolutely no pollution," he said.

.... The plant will save up to 200,000 metric tons of coal and 100,000 tons of fuel oil a year.

Comments

Anonymous said…

The first floating nuclear power plant was the MH-1A (see http://www.atomicinsights.com/aug96/MH-1A.html)

September 9, 2005 at 3:32 PM

Activists' Claims Distort Facts about Advanced Reactor Design

Below is from our rapid response team . Yesterday, regional anti-nuclear organizations asked federal nuclear energy regulators to launch an investigation into what it claims are “newly identified flaws” in Westinghouse’s advanced reactor design, the AP1000. During a teleconference releasing a report on the subject, participants urged the Nuclear Regulatory Commission to suspend license reviews of proposed AP1000 reactors. In its news release, even the groups making these allegations provide conflicting information on its findings. In one instance, the groups cite “dozens of corrosion holes” at reactor vessels and in another says that eight holes have been documented. In all cases, there is another containment mechanism that would provide a barrier to radiation release. Below, we examine why these claims are unwarranted and why the AP1000 design certification process should continue as designated by the NRC. Myth: In the AP1000 reactor design, the gap between the shield bu...

How many nuclear plants does it take to meet the world's energy needs?

Several weeks ago Joshua Pearce at Clarion University in Pennsylvania released a study titled “ Thermodynamic limitations to nuclear energy deployment as a greenhouse gas mitigation technology .” In the study he stated... nuclear energy production would have to increase by 10.5% per year from 2010 to 2050 to both replace fossil-fuel-energy use and meet the future energy demands. This line, of course, made the headlines and has been picked up by several outlets and blogs . When looking into his calculations for this statement, he made one assumption error that overstated the above sentence by nearly a factor of three. Page 121, Section 4.1 of the study states: Richard Smalley pointed out that in 2004, the global economy consumed the equivalent of 220 million barrels of oil per day, which converted into electricity terms is the equivalent of 14.5 TeraWatts (TW), or 14,500,000 MegaWatts (MW) (2005). … With a nuclear plant having about 1000 MW (1 GW) of capacity, we would need 14,500...

What Happens During a Refueling Outage?

You may have noticed over the past few weeks that a number of nuclear plants are shut down for refueling outages or are resuming operations after just returning from one. This type of routine outage usually occurs in the spring or fall when electricity demand is low so that nuclear reactors can replace about one-third of the spent fuel rods with new fuel and conduct other routine maintenance and repairs at the plant. To get a better sense of how refueling works at a nuclear energy facility, I spoke with Marcus Nichol, NEI’s senior project manager for used fuel storage and transportation, and asked him to explain the basics. Why does a nuclear plant need to replace one-third of its fuel? Nichol: The main purpose of a refueling outage is to replace older fuel that is depleted—meaning it can no longer efficiently produce energy from nuclear fission reactions—with new fuel. This “used fuel” has typically been used in the reactor for four-and-a-half to six years before it is pe...

NEI Nuclear Notes

Search This Blog