The DailyKos on Energy and Subsidies

A couple of weeks back, my colleague David Bradish published a post that cleared away a lot of the smoke that anti-nukes blow to conceal the truth about energy sources and government subsidies. Late on Friday, I came across a post at the DailyKos by diarist NNadir that merits further examination:

World-wide nuclear energy in 2004 produced about 2,620 billion kilowatt-hours of electricity, meaning that the "subsidy" amounted to about 0.6 cents per kilowatt-hour on average, a trivial portion of what the average person sees on his or her electric bill.

[...]

For comparison purposes - since it's likely to come up - solar electricity, which is also subsidized, produces power at 21.4 cents per kilowatt-hour according to the solar promotion site, Solar Buzz. In some places, like where I live, you can get the government to pay - to subsidize - about half of that cost, assuming you're wealthy enough to afford the other half. In spite of this wonderful state of affairs, solar electricity is still trivial. All the subsidies in the world have not made it produce even 0.1% of the world's electrical energy.

Nadir's conclusion: If anything, nuclear energy's real world performance would seem to make the case for additional subsidies.

Technorati tags: Nuclear Energy, Nuclear Power, Energy, Politics, Technology, Economics, Subsidies

Comments

mrshaba said…

I took notice of solar power in 2004 when yearly installations exceeded 1 GW. I had previously thought solar was an expensive joke but I don't anymore. The industry is doubling every three years and prices have declined by 20% with each doubling. Solar is expensive today but if you project out 10 years you have 16 GW of yearly production and electricity delivered at under 15 cents/kWh. The subsidies seem to be working. At what point does solar power become non-trivial to you Eric?

January 30, 2007 at 7:43 PM

Eric McErlain said…

I don't know -- perhaps you should address your concerns to Mr. Nadir.

January 30, 2007 at 8:11 PM

Activists' Claims Distort Facts about Advanced Reactor Design

Below is from our rapid response team . Yesterday, regional anti-nuclear organizations asked federal nuclear energy regulators to launch an investigation into what it claims are “newly identified flaws” in Westinghouse’s advanced reactor design, the AP1000. During a teleconference releasing a report on the subject, participants urged the Nuclear Regulatory Commission to suspend license reviews of proposed AP1000 reactors. In its news release, even the groups making these allegations provide conflicting information on its findings. In one instance, the groups cite “dozens of corrosion holes” at reactor vessels and in another says that eight holes have been documented. In all cases, there is another containment mechanism that would provide a barrier to radiation release. Below, we examine why these claims are unwarranted and why the AP1000 design certification process should continue as designated by the NRC. Myth: In the AP1000 reactor design, the gap between the shield bu...

How many nuclear plants does it take to meet the world's energy needs?

Several weeks ago Joshua Pearce at Clarion University in Pennsylvania released a study titled “ Thermodynamic limitations to nuclear energy deployment as a greenhouse gas mitigation technology .” In the study he stated... nuclear energy production would have to increase by 10.5% per year from 2010 to 2050 to both replace fossil-fuel-energy use and meet the future energy demands. This line, of course, made the headlines and has been picked up by several outlets and blogs . When looking into his calculations for this statement, he made one assumption error that overstated the above sentence by nearly a factor of three. Page 121, Section 4.1 of the study states: Richard Smalley pointed out that in 2004, the global economy consumed the equivalent of 220 million barrels of oil per day, which converted into electricity terms is the equivalent of 14.5 TeraWatts (TW), or 14,500,000 MegaWatts (MW) (2005). … With a nuclear plant having about 1000 MW (1 GW) of capacity, we would need 14,500...

What Happens During a Refueling Outage?

You may have noticed over the past few weeks that a number of nuclear plants are shut down for refueling outages or are resuming operations after just returning from one. This type of routine outage usually occurs in the spring or fall when electricity demand is low so that nuclear reactors can replace about one-third of the spent fuel rods with new fuel and conduct other routine maintenance and repairs at the plant. To get a better sense of how refueling works at a nuclear energy facility, I spoke with Marcus Nichol, NEI’s senior project manager for used fuel storage and transportation, and asked him to explain the basics. Why does a nuclear plant need to replace one-third of its fuel? Nichol: The main purpose of a refueling outage is to replace older fuel that is depleted—meaning it can no longer efficiently produce energy from nuclear fission reactions—with new fuel. This “used fuel” has typically been used in the reactor for four-and-a-half to six years before it is pe...

NEI Nuclear Notes

Search This Blog