NEI's Nuclear Performance

NEI's Nuclear Performance - July 2007

Here's a summary of U.S. nuclear plant performances last month:

For July 2007, the average net capacity factor reached 97.4 percent. This figure is 0.5 percentage points higher than the same one-month period in 2006. Monthly nuclear generation was 72.6 billion kilowatt-hours for July 2007, compared to 72.2 bkWh for the same one-month period in 2006.

For 2007, year-to-date nuclear generation was 468.3 billion kilowatt-hours, compared to 459.2 bkWh in 2006 (2.0 percent increase) and 461.4 bkWh in the record year of 2004.

With the exception of April 2006, nuclear generation in every month of 2007 has surpassed that of the same one-month periods for 2005 and 2006.

The Energy Information Administration recently analyzed the impacts of proposed climate change legislation by Senators Lieberman and McCain. The results forecast that nuclear plant capacity in the U.S. would grow from 100 GW to 246 GW by 2030. The proposed legislation would establish a series of caps on greenhouse gas emissions starting in 2012 followed by increasingly stringent caps beginning in 2020, 2030 and 2050.

For the report click here (pdf). It is also located on NEI's Financial Center webpage.

Comments

Anonymous said…

I can't seem to download the .pdf file of the monthly report. I keep getting a "connection timed out" error. I just upgraded to Adobe reader 8.1.

August 24, 2007 at 12:34 AM

Anonymous said…

Okay. It works now. Thanks.

August 24, 2007 at 12:46 PM

Activists' Claims Distort Facts about Advanced Reactor Design

Below is from our rapid response team . Yesterday, regional anti-nuclear organizations asked federal nuclear energy regulators to launch an investigation into what it claims are “newly identified flaws” in Westinghouse’s advanced reactor design, the AP1000. During a teleconference releasing a report on the subject, participants urged the Nuclear Regulatory Commission to suspend license reviews of proposed AP1000 reactors. In its news release, even the groups making these allegations provide conflicting information on its findings. In one instance, the groups cite “dozens of corrosion holes” at reactor vessels and in another says that eight holes have been documented. In all cases, there is another containment mechanism that would provide a barrier to radiation release. Below, we examine why these claims are unwarranted and why the AP1000 design certification process should continue as designated by the NRC. Myth: In the AP1000 reactor design, the gap between the shield bu...

How many nuclear plants does it take to meet the world's energy needs?

Several weeks ago Joshua Pearce at Clarion University in Pennsylvania released a study titled “ Thermodynamic limitations to nuclear energy deployment as a greenhouse gas mitigation technology .” In the study he stated... nuclear energy production would have to increase by 10.5% per year from 2010 to 2050 to both replace fossil-fuel-energy use and meet the future energy demands. This line, of course, made the headlines and has been picked up by several outlets and blogs . When looking into his calculations for this statement, he made one assumption error that overstated the above sentence by nearly a factor of three. Page 121, Section 4.1 of the study states: Richard Smalley pointed out that in 2004, the global economy consumed the equivalent of 220 million barrels of oil per day, which converted into electricity terms is the equivalent of 14.5 TeraWatts (TW), or 14,500,000 MegaWatts (MW) (2005). … With a nuclear plant having about 1000 MW (1 GW) of capacity, we would need 14,500...

What Happens During a Refueling Outage?

You may have noticed over the past few weeks that a number of nuclear plants are shut down for refueling outages or are resuming operations after just returning from one. This type of routine outage usually occurs in the spring or fall when electricity demand is low so that nuclear reactors can replace about one-third of the spent fuel rods with new fuel and conduct other routine maintenance and repairs at the plant. To get a better sense of how refueling works at a nuclear energy facility, I spoke with Marcus Nichol, NEI’s senior project manager for used fuel storage and transportation, and asked him to explain the basics. Why does a nuclear plant need to replace one-third of its fuel? Nichol: The main purpose of a refueling outage is to replace older fuel that is depleted—meaning it can no longer efficiently produce energy from nuclear fission reactions—with new fuel. This “used fuel” has typically been used in the reactor for four-and-a-half to six years before it is pe...

NEI Nuclear Notes

Search This Blog