Followup On ABC News Message Board

A couple of days back, I mentioned that the message board attached to the "Loose Nukes" special report on abcnews.com had suddenly disappeared. So I sent an email to the network's Web operation, and I've just gotten the following response:

Hello Eric,

Thank you for contacting us.

We are aware of the problem and are working on correcting it. We appreciate your patience and understanding. In the meantime, please check out our other features associated with the report:

http://abcnews.go.com/Technology/LooseNukes/

Thanks for logging on to ABCNews.com.

Regards,

Melanie
ABCNews.com
http://abcnews.go.com/

So, they seem to be suggesting it's just a technical malfunction. I'll be asking some more questions. Stay tuned.

UPDATE: Here's the abcnews.com response that just arrived:

Hello Eric,

Thank you for contacting us.

Unfortunately, we are unable to divulge the circumstances of the message board's current status. Please be patient, as we are working diligently on the issue.

Boy, that was fast. More later.

Technorati tags: Nuclear Energy, Energy, Technology, Homeland Security, ABC News

Comments

Anonymous said…

Interesting that the "loose nukes" message forum would be the one among many over there to have a "technical problem". Yeah, sure, sure, we get it. Just an innocent coinky-dink, no doubt.

October 22, 2005 at 10:20 PM

Activists' Claims Distort Facts about Advanced Reactor Design

Below is from our rapid response team . Yesterday, regional anti-nuclear organizations asked federal nuclear energy regulators to launch an investigation into what it claims are “newly identified flaws” in Westinghouse’s advanced reactor design, the AP1000. During a teleconference releasing a report on the subject, participants urged the Nuclear Regulatory Commission to suspend license reviews of proposed AP1000 reactors. In its news release, even the groups making these allegations provide conflicting information on its findings. In one instance, the groups cite “dozens of corrosion holes” at reactor vessels and in another says that eight holes have been documented. In all cases, there is another containment mechanism that would provide a barrier to radiation release. Below, we examine why these claims are unwarranted and why the AP1000 design certification process should continue as designated by the NRC. Myth: In the AP1000 reactor design, the gap between the shield bu...

How many nuclear plants does it take to meet the world's energy needs?

Several weeks ago Joshua Pearce at Clarion University in Pennsylvania released a study titled “ Thermodynamic limitations to nuclear energy deployment as a greenhouse gas mitigation technology .” In the study he stated... nuclear energy production would have to increase by 10.5% per year from 2010 to 2050 to both replace fossil-fuel-energy use and meet the future energy demands. This line, of course, made the headlines and has been picked up by several outlets and blogs . When looking into his calculations for this statement, he made one assumption error that overstated the above sentence by nearly a factor of three. Page 121, Section 4.1 of the study states: Richard Smalley pointed out that in 2004, the global economy consumed the equivalent of 220 million barrels of oil per day, which converted into electricity terms is the equivalent of 14.5 TeraWatts (TW), or 14,500,000 MegaWatts (MW) (2005). … With a nuclear plant having about 1000 MW (1 GW) of capacity, we would need 14,500...

What Happens During a Refueling Outage?

You may have noticed over the past few weeks that a number of nuclear plants are shut down for refueling outages or are resuming operations after just returning from one. This type of routine outage usually occurs in the spring or fall when electricity demand is low so that nuclear reactors can replace about one-third of the spent fuel rods with new fuel and conduct other routine maintenance and repairs at the plant. To get a better sense of how refueling works at a nuclear energy facility, I spoke with Marcus Nichol, NEI’s senior project manager for used fuel storage and transportation, and asked him to explain the basics. Why does a nuclear plant need to replace one-third of its fuel? Nichol: The main purpose of a refueling outage is to replace older fuel that is depleted—meaning it can no longer efficiently produce energy from nuclear fission reactions—with new fuel. This “used fuel” has typically been used in the reactor for four-and-a-half to six years before it is pe...

NEI Nuclear Notes

Search This Blog