Skip to main content

The Truth About Nuclear Power and Increased Water Temperatures

In a Letter to the Editor in today's Hamilton Spectator, Dr. Michael Ivanco, Society of Professional Engineers and Associates of Mississauga, Ontario puts the current impact of high temperatures in Europe on nuclear generating stations in the proper perspective:
The impact of drought in Europe on electricity supply is not a "nuclear" problem, as the writer suggests, rather it affects all electricity generating stations that use a steam cycle: nuclear, coal, gas and oil.

These account for over 80 per cent of all electricity generated on our planet. While water shortages have caused some thermo-electric plants to scale back production, it is important to note that they have not been required to shut down.

During the heat wave that hit Europe in the summer of 2003, by contrast, the contribution of wind-generated electricity to the electrical grids was virtually zero, since the wind did not blow.

While the overall output of nuclear plants may vary slightly due to other weather conditions, it will not drop to zero as some renewable sources do.

The single largest nuclear facility in North America is in the middle of the desert in Arizona and it does not suffer from any drought-related setbacks, simply because water conservation was built into its design.

There is no technical reason preventing future plants from being built to minimize water usage.
When you look at the blogosphere today the biggest intellectual fraud on this issue would have to be "environmentalist" Joel Makower. Not only has he been peddling scientific nonsense at his own blog, but also at the Huffington Post. We should also remember that Makower, when challenged, didn't simply update his blog, but altered it to make it appear as if he's considered our arguments beforehand.

For a real world application of everything we're talking about, take a look at the proposal for the third and fourth reactors at North Anna Nuclear Station.

Technorati tags: , , , , , , , ,

Comments

David Bradish said…
Thank you Dr. Michael Ivanco!!!

Popular posts from this blog

Activists' Claims Distort Facts about Advanced Reactor Design

Below is from our rapid response team . Yesterday, regional anti-nuclear organizations asked federal nuclear energy regulators to launch an investigation into what it claims are “newly identified flaws” in Westinghouse’s advanced reactor design, the AP1000. During a teleconference releasing a report on the subject, participants urged the Nuclear Regulatory Commission to suspend license reviews of proposed AP1000 reactors. In its news release, even the groups making these allegations provide conflicting information on its findings. In one instance, the groups cite “dozens of corrosion holes” at reactor vessels and in another says that eight holes have been documented. In all cases, there is another containment mechanism that would provide a barrier to radiation release. Below, we examine why these claims are unwarranted and why the AP1000 design certification process should continue as designated by the NRC. Myth: In the AP1000 reactor design, the gap between the shield bu...

How many nuclear plants does it take to meet the world's energy needs?

Several weeks ago Joshua Pearce at Clarion University in Pennsylvania released a study titled “ Thermodynamic limitations to nuclear energy deployment as a greenhouse gas mitigation technology .” In the study he stated... nuclear energy production would have to increase by 10.5% per year from 2010 to 2050 to both replace fossil-fuel-energy use and meet the future energy demands. This line, of course, made the headlines and has been picked up by several outlets and blogs . When looking into his calculations for this statement, he made one assumption error that overstated the above sentence by nearly a factor of three. Page 121, Section 4.1 of the study states: Richard Smalley pointed out that in 2004, the global economy consumed the equivalent of 220 million barrels of oil per day, which converted into electricity terms is the equivalent of 14.5 TeraWatts (TW), or 14,500,000 MegaWatts (MW) (2005). … With a nuclear plant having about 1000 MW (1 GW) of capacity, we would need 14,500...

What Happens During a Refueling Outage?

You may have noticed over the past few weeks that a number of nuclear plants are shut down for refueling outages or are resuming operations after just returning from one. This type of routine outage usually occurs in the spring or fall when electricity demand is low so that nuclear reactors can replace about one-third of the spent fuel rods with new fuel and conduct other routine maintenance and repairs at the plant. To get a better sense of how refueling works at a nuclear energy facility, I spoke with Marcus Nichol, NEI’s senior project manager for used fuel storage and transportation, and asked him to explain the basics. Why does a nuclear plant need to replace one-third of its fuel? Nichol: The main purpose of a refueling outage is to replace older fuel that is depleted—meaning it can no longer efficiently produce energy from nuclear fission reactions—with new fuel. This “used fuel” has typically been used in the reactor for four-and-a-half to six years before it is pe...